Interlux Interprotect White Epoxy Barrier Coat Kit - Gallon 2002G

Description

Other
Interlux Interprotect White Epoxy Barrier Coat Kit - Gallon 2002G
Product SKU:
ILX-2002G
Item Condition:
New
MSRP
9.92
Sale Price
1.83
Product Description:
Interprotect 2002E is a unique two part epoxy coating, developed to protect new and used fiberglass hulls from water absorption. Microplates create an overlapping barrier to help stop water migration through the coating. Interprotect is the product of choice for repairing gelcoat that has already been damaged by osmotic blistering.
Interprotect can be used above and below the waterline as a universal primer for all surfaces. Due to its anti-corrosive properties it is also ideal for use on metal.
For prevention and repair of gelcoat blistering
Excellent for use on underwater metals, hulls and keels
Easy to apply-dries quickly-no sanding
Use as part of a no sand system
Excellent anti-corrosive protection above & below the waterline
Specifications:
Finish:
Matte
Number of Coats:
1-5
Mix Ratio:
3:1 by volume
Application Methods:
Airless spray, brush, spray, roller
Associated Products:
Interlux Reducing Solvent - Spray:
Thinner for spray application & clean-up
Interlux Reducing Solvent - Brush
:
Thinner for brush application & clean-up
***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***
How To Apply
APPLICATION DATA METHOD
: Airless Spray, Brush, Conventional Spray, Roller
NUMBER OF COATS:
4-5 To Reach a 10 mils dry
DRY FILM THICKNESS PER COAT:
2.6 mils (5.4 wet mils)
COVERAGE:
240 sq. ft/gal.
APPLICATION TEMP:
41°F Min. / 95°F Max.
THINNER:
Reducing Solvent 2316N or Brushing Liquid 2333N
DRY TIMES:
Temp
To Touch
Pot Life
95°F
1/2 HR
2 HR
73°F
2 HR
3 HR
50°F
3 HR
7 HR
OVERCOATING:
Overcoated By
41°F
50°F
73°F
95°F
Min
Max
Min
Max
Min
Max
Min
Max
ACT
7 HR
9 HR
5 HR
7 HR
3 HR
5 HR
Epoxy Primekote
16 HR
24 HR
6 HR
16 HR
4 HR
10 HR
Fiberglass Bottomkote NT
7 HR
9 HR
5 HR
7 HR
3 HR
5 HR
Interlux Antifouling Paints
7 HR
9 HR
5 HR
7 HR
3 HR
5 HR
Interprotect 2000
10 HR
6 MTH
5 HR
6 MTH
3 HR
6 MTH
2 HR
6 MTH
Micron 66
10 HR
24 HR
7 HR
9 HR
5 HR
7 HR
3 HR
5 HR
Micron Extra w/Biolux
7 HR
9 HR
5 HR
7 HR
3 HR
5 HR
Trilux 33
10 HR
24 HR
7 HR
9 HR
5 HR
7 HR
3 HR
5 HR
Ultra w/Biolux
7 HR
9 HR
5 HR
7 HR
3 HR
5 HR
Watertite
4 HR
18 HR
4 HR
18 HR
4 HR
18 HR
BARE FIBERGLASS OR EPOXY:
Remove all surface contamination using Fiberglass Surface Prep YMA601, flush with fresh water. Allow to dry. Sand with 80 grade (grit) paper. Remove sanding residue. Wipe with Fiberglass Solvent Wash 202.
BARE WOOD:
Sand with 80-180 grade (grit) paper. Remove oil from oily woods (eg teak), using Special Thinner 216 or 2316N. Change rags frequently.
STEEL HULLS:
Degrease by wiping with a rag soaked in Fiberglass Solvent Wash 202. Gritblast to near white metal surface. A surface profile of 2-3 mils (50-75 microns) is recommended. If gritblasting is not possible, grind the metal suface with 2436 grit abrasive discs to a uniform, clean, bright metal surface 2-3 mils (50-75 microns) anchor pattern. Remove sanding residue and immediately apply Interprotect 2000E.
ALUMINUM:
Degrease by wiping with a rag soaked in Fiberglass Solvent Wash 202. For the Advanced Performance System grit blast or grind surface, using aluminium compatible materials, to completely remove any aluminium oxide present on the surface. A surface profile of 3-4 mils (75-100 microns) is recommended. Wipe with Fiberglass Solvent Wash 202. Apply the first coat of Interprotect 2000E as soon as possible after the surface preparation. If gritblasting is not possible, grind the metal surface with 24-36 grit abrasive discs to a uniform, clean, bright metal surface 3-4mils (75100-microns) anchor pattern. Remove sanding residue and immediately apply Interprotect 2000E.
APPLICATION INFORMATION:
If filling is required, use appropriate filler after the first coat of Interprotect 2000E has been applied. Before painting, remove any dust with a dust wipe. Only 1 coat is required when used as a tie coat over Interprime 450 VOC. Stir or shake individual components thoroughly. Add curing agent to the base at 1 part curing agent to 3 parts base (by volume). Stir and leave for 20 minutes to allow the bubbles to disperse. Airless Spray Pressure: 165 bar/2400 psi. Tip Size: 1880-2680, 0.44-0.53mm/17-21 thou. Conventional Spray Pressure Pot: Pressure: 3.44-4.47 bar/50-65 psi (gun pressure); 10-15 psi (pot pressure). Tip Size: 1.5-1.8 mm/60-70 thou. Siphon Cup: Pressure: 3.44-4.47 bar/50-65 psi - gun pressure. Tip Size: 1.8-2.2 mm/70-85 thou. Pressure: <2 bar (Pot)/3-4 bar (Atomising). Thin using 10-15% 2316N or YTA910. Use a natural bristle brush. Use a 3/8" nap solvent resistant roller. r To figure out how much paint is necessary, calculate as follows: Wetted Surface Area (WSA) = LOA x Beam x 0.85, then divide the WSA by 60 when brushing/rollering or 45 when spraying to determine the number of gallons necessary to reach 10 mils. Do not use below 5°C/41°F. Do not apply over conventional (one-pack) coatings. Do not apply when there is a chance of condensation forming on the surface. Ambient temperature should be minimum 5°C/41°F and maximum 35°C/95°F. Product temperature should be minimum 10°C/50°F and maximum 35°C/95°F. Substrate temperature should be minimum 5° C/41°F and maximum 35°C/95°F. Apply to clean, dry, properly prepared surfaces only. Do not apply over one part paints. When applying vinyl antifoulings such as VC Offshore and Baltoplate® to Interprotect, apply an extra coat and allow epoxy to cure overnight then sand with 80 grade (grit) paper to avoid wrinkling. When overcoating with VC 17m or VC 17m Extra allow Interprotect 2000E to dry for 24 - 36 hours, then sand with 180-220 grit sand paper.
About Us
Wholesale Marine is an on line boating store founded to provide customers an easy way find top-quality products at the lowest prices. With associates who possess decades of combined boating experience, Wholesale Marine can truly provide expert customer service.
Shipping Method
Wholesale Marine currently ships all merchandise UPS or truck freight. All orders with in-stock items placed by 2:00 PM EST Monday - Friday are shipped that same day. Orders placed after 2:00 PM on Friday and orders place on Saturday and Sunday will ship on the following Monday. Orders that qualifying for free shipping may be shipped  any method and carrier chosen by Wholesale Marine.  Free shipping offers are only valid within the continental U.S.
There are certain items that we cannot ship outside of the Continental United States. Items that cannot be shipped outside of the Continental United States include all name brand watersports products and hazardous materials, such as but not limited to paint, oil, resins and adhesives.
*Canadian Customers: Please be aware that any brokerage, duty, or customs fees are out of our control.
Returns
Wholesale Marine will gladly refund almost any merchandise within 30 days from original purchase date. To return just send merchandise prepaid, in its original unused condition. Please include a copy of original Wholesale Marine invoice. We will then refund the merchandise amount by the original payment method. Shipping costs are not refundable. No returns for special order items, electronics, cut lengths of material or hazardous materials, such as but not limited to paint, oil, resins and adhesives.
Please ship all Returns to:
Wholesale Marine
147 Circle Freeway Drive
Cincinnati, OH 45246
Connect with Us
Find us on:
Powered by SixBit's eCommerce Solution