2X 14 KT W/Yellow Gold Filled Ring Guard Size Adjuster-FOR custom fit Ring Guard

Description

SOLD- 2X (EACH SIZE)
Small/Medium Size Ring Guards
Small Ring Guards - These are best for children's rings, women's rings. Fit shanks upto 2.5 mm.
MEDIUM (20 x 2 mm)  Sized Ring Guard is ideal for a typical women's ring. The arms are about 6mm's long which would fit a ring band of about 2mm to 3 mm thickness.
For Large/Thicker banded Ring
The Large ( 21 x 2 mm )Sized Ring Guard is ideal for a ring with a thicker band. The arms are about 11 mm's long which would fit a ring band of about 4mm to 6 mm thickness.
Ring Guard Instructions
Tools Needed: Pair of Chain Nose or Needle Nose Pliers
Step #1:
Place the ring guard with arms curved upward . Depending on the style of ring guard some might have arms going opposite directions, both are installed in the same manner.
Step #2:
Place the ring shank inside the curved arm of the ring guar
d.
Step #3:
Push down on ring guard so it takes the shape of the shank.
Step #4:
Be sure the shank rests at the back of the guard's arm (inside curve) for best fit.
Step #5:
With pliers, in a circular motion, tighten the ring guard arm to your ring's shank.
Step #6:
....until the ring guards arm has gone around the inside of the ring shank and clamp down to tighten.
Step #7:
Repeat for second arm.
Follow Up:
Once the ring guard is in place you may adjust the 'size" of the ring. Just push up (or down) on the middle band of the ring guard to tighten or loosen it on your finger.
Feel free to ask any questions.
USA
SHIPPER - Immediate & Fast Shipping -
Satisfaction Guaranteed!